login | register
Wed 01 of Aug, 2007 [09:21 UTC]

voip-info.org

Navigation
Today's Deals
Recently Visited Pages
Search with Google
Search this site with Google. Results may not include recent changes.

Web www.voip-info.org
Last Changes
Shoutbox
  • Aykut, Wed 01 of Aug, 2007 [07:53 UTC]: Hi all, does anybody know about Thomson ST2030 SIP phone. I have upgraded it to latest version (1.56) but "Hold" and "Conf" features are not working after the upgrade ?? Do you know any solution or do you have Ver. 1.52 ?? Where can I find it?
  • Edward J Brown, Tue 31 of Jul, 2007 [23:33 UTC]: Has anybody experienced Choppy voice quality when using a Linksys SPA942 in an Asterisk Conference bridge? It works fine with my polycom and Cisco, but sucks with my Linksys.
  • www.astawerks.com, Fri 27 of Jul, 2007 [18:00 UTC]: does anyone use asterisk on top of clark connect? does it work good?
  • simon, Fri 27 of Jul, 2007 [14:16 UTC]: Hi All, Has anyone here managed to get the Cisco79x1 to successfully fail over to the backup proxy. I have 2 asterisk servers , handsets all register and function, except that backup proxy function doesn't work. Any working example would be very apprecia
  • Matthew Richmond, Thu 26 of Jul, 2007 [03:40 UTC]: using the page() application to page across our building...often the meetme conferences don't disconnect after the caller hangs up. Anyone else having this problem. (using Polycom phones)
  • Matthew Richmond, Wed 25 of Jul, 2007 [02:58 UTC]: thanks Nicholas Blasgen! I haven't worked with AGI before, but there's always a first! Thanks again!
  • Nicholas Blasgen, Tue 24 of Jul, 2007 [19:18 UTC]: Matthew Richmond, AGI will handle all that for you.
  • sam, Mon 23 of Jul, 2007 [16:39 UTC]: need help - certain voicemail extension will stop working and recording voicemail on asterisk - anyone know why and how to fix it? Thanks
  • john haji, Mon 23 of Jul, 2007 [14:55 UTC]: free calls to pakistan
  • bong, Sat 21 of Jul, 2007 [19:09 UTC]: hi good day to all can anyone help me how to configured the nortel sip to the signaling server and how to activate in mobile w/ sip compatible without mcs
Server Stats
  • Execution time: 0.30s
  • Memory usage: 2.19MB
  • Database queries: 30
  • GZIP: Disabled
  • Server load: 2.23

Asterisk v1.2

Asterisk 1.2.x


When will it be released?

On Nov. 15, 2005 Asterisk 1.2.0 finally saw the light of day!
  • On Dec 7, 2005 Asterisk 1.2.1 was released - read the change log
  • On Jan 18, 2006, the (bad!) Asterisk 1.2.2 came about - read the change log.
  • Asterisk 1.2.3 was released in a hurry to fix a bad bad bug that was introduced 1.2.2
  • Asterisk 1.2.4 came with a fix for a memory leak that was present in previous 1.2.x releases

What is included?

Asterisk v1.2 includes
  • A re-enginered database interface library called ARA, The Asterisk Realtime Architecture
  • New configuration file logic with templates
  • New dialplan syntax and an experimental new dialplan language: AEL
  • New music-onhold functions for native music
  • New file formats: Ogg Vorbis and Sun Microsystem's AU-files
  • Many improvements in the SIP channel
  • IAX2 jitterbuffer and packet loss concealment
  • Many new applications and dialplan functions
Asterisk 1.2 maintains backwards compatiblity with Asterisk 1.0 in regards to configuration files - there are only a few small things that have changed (well documented in UPGRADE.txt).

To get an overview, check this presentation of Asterisk 1.2 by Edvina.net Training, or look at the more comprehensive list on the Digium web site.

Upgrading from version 1.0.x

download the asterisk-1.2.0.tar.gz and if needed all other necessary downloads from http://www.asterisk.org/download. after unzip there are two ways for installation:
1) run make, make install and make samples. it is like a complete new installation. your old config files will be renamed to .old if you run make samples
2) run make, make upgrade.

It is recommended in both ways that you remove the *.so files in your asterisk modules directory prior to doing "make install" from the new 1.2. if you don't remove you got error messages by starting asterisk. then you must remove following .so files in your asterisk modules directory (should be in /usr/lib/asterisk/modules/):
app_intercom.so
app_striplsd.so
app_substring.so
chan_modem_aopen.so
chan_modem_bestdata.so
chan_modem_i4l.so
chan_modem.so
chan_oss.so
pbx-wilcalu.so


If you are updating from a previous version of Asterisk, make sure you read the UPGRADE.txt file in the source directory. There are some files and configuration options that you will have to change, even though we made every effort possible to maintain backwards compatibility.

In order to discover new features to use, please check the configuration examples in the /configs directory of the source code distribution. To discover the major new features of Asterisk 1.2, please visit http://www.astricon.net/asterisk1-2/

Where?

Asterisk 1.2 is available on the Digium FTP Server and mirrors. The current development version, Asterisk 1.3dev, is available in the Subversion repository on svn.digium.com. Download instructions.

See also


Go back to Asterisk

Created by oej, Last modification by oej on Fri 03 of Mar, 2006 [08:32 UTC]

Comments

Comments Filter

Missing file or wrong url ?

by Mats Karlsson on Wednesday 03 of August, 2005 [10:48:52 UTC]
The presentation of Asterisk 1.2 seems to be lost in cyberspace ?

/Mats

Please update this page with new information, just login and click on the "Edit" or "Add Comment" button above. Get a free login here: Register Thanks! - support@voip-info.org

Page Changes | Comments

Sponsored by:
Terms of Service Privacy Policy
© 2003-2007 Arte Marketing, Inc.

Powered by bitweaver