Asterisk with a T100P connected to a Fujitsu 9600 with an ISDN PRI Card

9600 Software version: E12V10L21
9600 Hardware Used: BPTKCA, B1DK2B

• Need to set DSW00-2 to OFF (D-Channel Inversion NO)
• Set DSW00-3 OFF for ESF
• Set DSW00-4 & DSW00-5 to OFF OFF for B8ZS
• When making a cable to Asterisk, be aware that Fujitsu uses pins 4,5 & 7,8 instead 1,2 & 4,5. Make a cable like this:
• Looking at top of connector with cable exiting towards you and locking tab down left to right:
• PIN Asterisk 9600
• 1 wht/blu wht/brn
• 2 blu/wht brn/wht
• 3 wht/grn wht/grn
• 4 org/wht blu/wht
• 5 wht/org wht/blu
• 6 grn/wht grn/wht
• 7 wht/brn wht/org
• 8 brn/wht org/wht
• BIG clue that your cable is not correct - LRS light on front of BPTKCA will not go out no matter what!

---

Asterisk Configuration


span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
loadzone = us
defaultzone=us



;
; Zapata telephony interface
;
; Configuration file
[channels]
busydetect=1
busycount=7

relaxdtmf=yes
callerid=asreceived
;
context=bell
;
signalling=pri_net
;
usecallerid=yes
;
transfer=yes
;
echocancel=yes
;
echocancelwhenbridged=yes

switchtype=5ess


;
rxgain=0.0
txgain=0.0
;
group=1

immediate=no
;
channel => 1-23

---

9600 Configuration:

TBD